Build Instructions

Collapse

• 1

  Skills Required:

  This project may seem difficult or very complex, but it is definitely not completely, since you will have all the guidance for the construction, it was difficult for me to design it to make life a little easier for you. Any conceptual doubt, you are free to ask it without problems.

  • You should have an understanding of:
  • 3D Printing (Optional for the case).
  • Arduino programming (I give you the code).
  • Soldering through hole components.

  Warning: In this project we will handle main power, so please be careful

• 2

  Components and Parts List

  The Electronics discrete components as resistors and transistors will be attached in a BOM file in the PCB Step.

  • Here is the list of what you will need for the whole process:
  • -10kohm Potentiometer.
  • -2 Double Terminal blocks.
  • -AC motor of your preference (single phase).
  • -Dimmable Lightbulb.
  • -Small 5 volts cellphone power supply.
  • -Measuring tools: multimeters, clamp meters (optional).
  • -Micro USB SMD connector.
  • -1.3 inch OLED Display.
  • Wire.

  BOM list of PCB components attached.

  Great, cheap and awesome Graphical Multimeter to watch the Sinusoidal AC wave form

• 3

  Circuit Diagram

  Here is the Circuit Diagram of our project:

  It has all the internal conections of the circuit that will us allow to create the PCB design later.

  I also attached the PDF of the Schematics so you can see it better.

View all 10 instructions