Quantity   Component name
1 × Raspberry Pi 3 Model A+ https://www.raspberrypi.com/products/raspberry-pi-3-model-a-plus/
1 × Wide Angle UVC Cam About 120 degrees. From junk.
1 × LiFePO4 12.8V 12Ah Battery https://www.amazon.co.jp/gp/product/B0B255DZL4
2 × Solar Panel 18V 4.2W https://www.amazon.co.jp/gp/product/B093BK3GVT
1 × Solar Charge Controller 12V 30A https://www.amazon.co.jp/gp/product/B01N6PHQL1
2 × 37GB555 Motor 12V 56rpm https://ja.aliexpress.com/item/4001136043485.html
2 × RS775 Motor 12V 6000rpm https://ja.aliexpress.com/item/32954455244.html
1 × ZK-5AD Motor Driver 5A 3V-14V https://ja.aliexpress.com/item/4001144312530.html
1 × Relay Module 2CH 5V https://ja.aliexpress.com/item/1005002867727977.html
1 × USB Power Supply for Cars From junk.
1 × 4Ω 3W speaker From junk.
1 × TDA2030A 6-12V 18W https://www.amazon.co.jp/gp/product/B084VNQRRG
12 × Capacitor Ceramic 0.1μF For motor noise suppression.
1 × Crawler Parts Set https://ja.aliexpress.com/item/1005002060118722.html
1 × WS2812B LED Tape Light https://www.amazon.co.jp/gp/product/B08THFP6K7
1 × M6 full threaded rod 50cm For supporting camera.
14 × M6 nut For supporting camera and fixing bumper.
2 × M6 washer For supporting camera.
1 × Brushless DC Fan 12V For intake.
1 × Filter To prevent dust from entering.
1 × Fan Guard
2 × PVC Cap VU75 For Eccentric Tire.
1 × Stepped Rubbur 10cm * 10cm For Eccentric Tire.
12 × Rivet For Eccentric Tire.
1 × Wood Square Bar 19mm * 19mm * 500mm For Bumper.
4 × Limit Switch https://www.amazon.co.jp/gp/product/B084VP58C5
1 × Black on Yellow Tape 500mm For Bumper.
1 × Cotton swab case. For Camera Cover.
1 × Smoke Film. For Camera Cover.
1 × Aluminum Angle 5mm * 5mm * 1m For Rain Proof Top Panel.
1 × Rocker Switch 19mm 20A https://www.amazon.co.jp/gp/product/B07LB2KV33
1 × DC Connector https://ja.aliexpress.com/item/32874875021.html
1 × Aluminum Angle 10mm * 10mm * 20cm For Body Reinforcement.
2 × Flange Coupling 5mm https://ja.aliexpress.com/item/4000221287535.html
2 × Pizza Cutter For Blades
8 × Utility Knife For Blades
1 × Nylon Code 40cm For Blades
48 × M3 Bolt 8mm
1 × Fixed Wheel
42 × M3 Washer
32 × M3 Nut
10 × M2.5 Spacer For fixing raspberry pi and modules.
10 × M2.5 Bolt 8mm For fixing raspberry pi and modules.
1 × Grommet 19mm For RainProof.
1 × Fuse Holder 30mm For Safety.
1 × Fuse 15A 30mm For Safety.
1 × Aluminum Composite Board 900mm * 900mm For Body Panel
4 × Steel Angle 90mm * 90mm For body panel fixing.
2 × M4 bolt 8mm For RS775 fixing.
42 × M4 washer For RS775 fixing and crawler roller..
1 × micro sd card 32gb https://www.amazon.co.jp/dp/B08PTNWQ6P
8 × M4 70mm bolt For crawler roller.
16 × M4 10mm spacer For crawler roller.
40 × M4 nut For crawler roller.
4 × M6 15mm bolt For bumper fixing
2 × L-shaped long stay https://www.komeri.com/shop/g/g41280/
4 × Reusable tie wrap https://jp.daisonet.com/products/4550480088907
20 × Tie Wrap https://jp.daisonet.com/products/4549131713121
2 × Wood screw 10mm For fixing bumper
20 × Dupont wire https://www.amazon.co.jp/dp/B07MNSRX78
5 × Heat Sink https://ja.aliexpress.com/item/1005003323689097.html
1 × Acrylic double-sided tape https://jp.daisonet.com/products/4549131507836
1 × Waterproof sponge tape https://jp.daisonet.com/products/4549131752915
1 × Battery terminal connector https://www.amazon.co.jp/dp/B086XB9CLM
1 × Cable clip https://www.amazon.co.jp/dp/B09PB5MW9P
1 × AWG14 cable https://www.amazon.co.jp/dp/B001F03Y4I
4 × 70cm string Camera shake prevention
6 × M3 15mm spacer For eccentric tire
6 × M3 30mm bolt For eccentric tire
2 × Covered button For blade
4 × M3 bolt 10mm For fixing between stanless disk and frange coupling