0%

0%

julien

Learning through building is my passion. If it works rip it apart and find out why.

Varies

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 12/24/2015.

My Projects

It can power the Raspberry Pi Zero over Ethernet. The board also adds an Ethernet Phy to the Raspberry Pi Zero to give you full Ethernet

PoEPi: Pi Zero Power over Ethernet with PHY

An open source Raspberry Pi Hat template to help developers get there Hats built

Raspberry Pi Hat Template

An easy to use BLE module for the Raspberry Pi based on the nRF51x chipset

BLEezy: Raspberry Pi Zero

Projects I Like & Follow

The CAT Board is part of a Raspberry Pi-based hand-held FPGA programming system.

CAT Board

dave-vandenbout Dave Vandenbout

Bridging the gap between professional and DIY/hobbyist bench power supply

DIY programmable (SCPI) bench power supply

Similar to the vga666 board, but re-designed for the Pi Zero.

Super low cost VGA output for the Pi Zero

Let's stick a games console in a NES controller. That sounds like a good plan.

Zero Entertainment System

The 2016 Hackaday Prize

Selfmade watch that helps You learn STM32 programming.

nWatch

peter-wasilewski Peter Wasilewski

It seems as if everyone is making their own hubs for their Pi Zero these days.

(One More) Raspberry Pi Zero USB Hub

PlatformIO is an open source ecosystem for IoT development (Cross-platform IDE and unified debugger. Remote testing and firmware updates)

PlatformIO

ivan-kravets Ivan Kravets

kicad ECAD meets MCAD world: with this hack, you can finally export your kicad board and assemblies to MCAD world!

kicad StepUp script hacks MCAD world!

maurice Maurice

A very small HiFi audio CODEC module

HiFi audio codec module

michele-perla Michele Perla

All you want to know about KiCAD. Whether you're a starter or a power user, there should be something for everyone here shortly.

The KiCAD Central

kumar-abhishek Kumar, Abhishek

PowerBlade is the smallest, lowest cost, true-power plug-load power meter, and communicates to smartphones over BLE

PowerBlade

A small, low cost and low power Cortex-M0+ dev board

MoonLander

alex-hiam Alex Hiam

A Li-Ion charger for Solar or USB with PMIC/RTC, 5V boost converter and USB Hub that can run Linux for only $5 more!

"Solar Pi Platter"

dan-julio Dan Julio

Arduino based all-in-one inkjet emulator for those that want just to use the scanner when the printer part failed

Canon all-in-one inkjet emulator

Experimental graphic editor for open FPGAs. Built on top of icestorm project.

Icestudio

jess-arroyo-torrens Jesús Arroyo Torrens

Led clock with a Raspberry Pi web radio

TimeArc

Creating a monitoring and control network for the urban farm and aquaponics system at Garinger High School

Growing Education

Just add smart-phone. MobBob is a walking, talking, seeing, listening robot companion that you can 3D print and build for around USD$30.

MobBob - Smart-phone powered robotic companion

kevin-chan Kevin Chan

View all

Bits

Dave Vandenbout wrote 01/26/2016 at 02:07

Thanks for the follow!

Are you sure? yes | no

Dave Vandenbout wrote 01/25/2016 at 14:29

Thanks for the skull!

Are you sure? yes | no